Land Rover · Jaguar

Land Rover & Jaguar
OBD codes explained

The codes JLR owners actually see — misfires, EGR, catalysts and boost — with clear causes and fixes.

Land Rover / Jaguar P-codes Causes & fixes Free decoder
Share:
Advertisement
Part 1 · The basics

Land Rover / Jaguar check engine light codes

Land Rover and Jaguar (JLR) use standard OBD-II engine codes. Deep module diagnostics use SDD/Pathfinder tools, but engine codes are readable generically.

Here are the codes most reported on Range Rover, Discovery, Defender, Evoque and Jaguar models.

Part 2 · Decode

OBD-II code decoder

System
Type
Subsystem
Fault #
Part 3 · The dictionary

Most common Land Rover / Jaguar

Classic JLR faults behind these codes.

Code Description
P0011 "A" Camshaft Position Timing Over-Advanced (Bank 1)
P0101 Mass Air Flow (MAF) Sensor Range/Performance
P0171 System Too Lean (Bank 1)
P0234 Turbocharger Overboost Condition
P0300 Random/Multiple Cylinder Misfire
P0401 EGR Flow Insufficient
P0420 Catalyst System Efficiency Below Threshold (Bank 1)
P0442 EVAP System Small Leak Detected
Advertisement
Part 4 · Common faults

Common Land Rover / Jaguar faults

Classic JLR faults behind these codes.

1

Lean mixture (P0171) — vacuum leaks, common on supercharged petrol engines.

2

Misfires (P0300) — coils and plugs, common across the range.

3

Catalyst efficiency (P0420) — aging converter.

4

EGR flow (P0401) — carbon buildup on diesel models.

5

Boost faults (P0234) — supercharger/turbo boost control on petrol and diesel.

Advertisement
Part 4 · Common faults

Land Rover / Jaguar FAQ

Why does my Range Rover show P0171?
A lean mixture on JLR petrol engines is often a vacuum leak around the intake or a dirty MAF. Supercharged engines are sensitive to small leaks.
Is P0234 serious on a Land Rover?
Overboost can indicate a faulty boost control or wastegate. Limp mode may activate; get it diagnosed before driving hard.
Are Land Rover and Jaguar codes the same?
Yes — JLR shares engines and diagnostics, so engine codes are identical.
Can a cheap scanner read JLR codes?
Yes for engine codes. Module-level JLR diagnostics need SDD/Pathfinder or a professional tool.
What should I check first on a misfire?
Ignition coils and spark plugs are the most common cause on JLR petrol engines. Swap coils between cylinders to confirm.

Codes vary slightly by model, year and engine. Always confirm with a proper diagnosis. Manufacturer-specific codes (P1xxx/P2xxx) may differ from generic descriptions.

Continue reading

Decode your Land Rover / Jaguar code now

Use the free decoder below, or browse the most common Land Rover / Jaguar codes.

Advertisement